JAMES DULLEY Cutting your utility bills Insulating window films reduce heat and glare
Q. T he sun's heat and glare are uncomfortable coming through the windows and it is also fading my furniture and carpeting. Will applying clear inexpensive insulating window film minimize these problems?
A. New insulating window films can reduce heat and glare by more than 50 percent and block nearly all the sun's ultraviolet fading rays through your windows. True insulating window films also reduce heat loss during winter and make sitting by a window more comfortable year-round.
Insulating window films are not totally "clear," but the tint in some is so slight that when applied to the window glass, it is barely noticeable. All window film makes glass more shatter-resistant and safer around children. Some heavier films can also enhance security against window break-ins.
Window film is available in rolls or single window boxes for do-it-yourself application or from professional installers.
Installing it yourself can save up to 75 percent of the cost of professionally installed film.
Residential window films are considered permanent because, with proper cleaning, they can last 10 years or more. If you decide to remove the film at a later date, the manufacturers offer removal solutions that quickly dissolve the adhesive. The window glass surface is not harmed.
The primary difference between DIY and professional films from companies that offer both is the type of adhesive used. On all but the largest windows which require more installation skills, DIY application looks as good. Another advantage of professional installation is a long warranty.
True insulating window films derive their energy-saving/comfort properties from a low-emissivity (low-e) coating in the film. This is the same low-e technology used on new super-efficient replacement window glass.
This low-e coating is a microscopically thin layer of metal on the film's inner layer. Visible light passes through it making it invisible.
Heat energy from the sun and reflected from walkways, patios, etc. is a different wavelength than visible light and is blocked by the low-e film. During winter, it also keeps heat indoors.
Energy-saving qualities vary widely for different window films, so don't just buy the cheapest film on sale. Compare the film properties first.
The emissivity is a key property to determine year-round insulating/comfort value. Shading coefficient indicates how much heat/glare are blocked.
If you can wash a window, you can easily install insulating window film yourself. You purchase the film, in pieces from a roll or in boxes, and a simple installation kit. Most films have a water-activated adhesive on one side.
Q. Several of our thermal pane windows have developed leaks and there is a fog between the panes of glass. Is it possible to repair them, or do I have to replace the entire window sash?
A. It is very difficult to repair the window panes to clear out the fog. You must get the panes apart, clean out the fog and the glass and reseal the panes with dry desiccant between them. It is also dangerous to work with the glass.
It would be much better to replace the glass assembly. Whether or not you have to replace the entire sash depends on the design you have. With the vinyl casement windows in my home, I can remove the panes from the sash.
XWrite for Update Bulletin No. 617 which gives a buyer's guide of seven DIY (plus a small sample) and professional film manufacturers (34 films) listing savings/comfort properties and installation instructions. Please send $3 and a business-size SASE to James Dulley, The Vindicator, 6906 Royalgreen Drive, Cincinnati, Ohio 45244. For an instant download, visit James Dulley online at www.dulley.com.